Information
Product Introduction
Travel motor
The single-motor travel drive technology is adopted. The whole travel system uses one motor, which is connected to the drive axle through a transmission shaft to optimize power matching, so that the whole machine has a larger torque output and a faster response speed.
The motor adjusts the speed in real time according to the throttle opening to achieve stepless speed change of the whole machine.
Drive axle
It adopts XCMG's self-made reinforced drive axle with optimized bridge housing design and enlarged housing cross-section, which increases the load-bearing capacity and bending resistance by 10%.
Strong construction machinery drive shaft with strong impact resistance and high power transmission reliability.
Finite element analysis is performed on key structural parts to reduce stress concentration, eliminate local weaknesses, and ensure that they can meet various harsh working conditions.
The front and rear frames are designed for heavy loads and super strength, with thick steel plates, high strength and strong load-bearing capacity.
Reasonable layout, simple structure, reduced profiles and irregular welds, strengthened important load-bearing parts, and able to withstand torsion and impact loads under various working conditions.
Increasing the distance between the upper and lower hinge pins at the hinge center and dispersing the forces at the hinge can reduce the stress on the hinge pin and increase the service life of the bearing.
The working device is optimized in design and adopts a Z-type reverse six-link structure with a single rocker arm, short tie rod, and horizontal boom cylinder. It has small unloading impact and has excellent working performance and efficiency.
The main hinge points adopt a two-stage dustproof structure, which can effectively prevent dust and protect the grease from contamination, providing reliable protection for the hinge pins and sleeves.
The main wear-prone parts of the bucket are made of wear-resistant plates, which ensures a long service life of the bucket.
XCMG's new slightly pressurized cab has a large space, a wide field of vision and good sealing.
High-performance shock absorbers are connected to the frame, which greatly reduces the vibration of the cab.
Mechanical shock-absorbing composite control seat, comfortable operation.
Intelligent temperature control high-power heating and cooling air conditioner, suitable operating temperature.
Product selling points
The XC938-EV electric loader is available with optional 1.8-3.0 m³ series buckets, wood clamps, grass grabbers and quick-change implements.
XCMG's new slightly pressurized cab has a large space, a wide field of vision and good sealing.
It adopts a single-pump split-flow quantitative hydraulic system and a working device pilot control, which makes the operation precise and easy.
Finite element analysis is performed on key structural parts to reduce stress concentration, eliminate local weaknesses, and ensure that they can meet various harsh working conditions.
English 
Arabic 
Reviews
There are no reviews yet.